TERRAHAWK CW-30

0hrs
Flight Time
0m
Wingspan
0m/s
Cruise Speed
0km
Comm. Range
0kg
Max Take-off Weight

The TerraHawk CW-30 is a fixed-wing VTOL UAV LiDAR system that features Phoenix’s most powerful LiDAR system, the RANGER. This next-generation combo builds upon the strengths of the TerraHawk CW-20, enhancing your acquisition range while simultaneously protecting your valuable investment from dangerous belly landings that are still so common in the industry. With 2-hour autonomous flight times, an auto-return system, and a backup auto-landing system, this system is built for some of the most demanding acquisition scenarios on the market.

FINANCING OPTIONS: Phoenix LiDAR Systems and AP Equipment Financing have partnered to provide you with the most comprehensive financing programs for your LiDAR mapping needs. Click here for more information. Restrictions may apply.

REQUEST A QUOTE
SAMPLE DATA
FULL SPECS
WATCH VIDEO

PERFECT FOR MAPPING UTILITY CORRIDORS & TACKLING THE MOST DIFFICULT SURVEYING CONDITIONS

This system integrates proprietary Phoenix LiDAR hardware and software, with hardware from JOUAV & RIEGL.

Features

  • Large Scan Area: Map up to 52 sq. km. in one flight
  • Ideal for high speed, high altitude, dense vegetation, and large scan areas
  • Operating AGL: Up to 350 m
  • Complete Ground Control: Payload is directly controlled through the JOUAV Ground Control Station
  • Advanced Multi-Rotor Backup: Initiates multi-rotor auto-landing if abnormalities are detected
  • Industry Leading Flight Time: Fly to 2 hours
  • VTOL: No runway or launch/recovery equipment required, backup auto-landing system protects your LiDAR equipment
  • Fixed-Wing: Enjoy the speed and stability of a fixed-wing UAV
  • Autonomous Flight: Use waypoints for auto flight and return
  • Modular Upgrade Options: Photogrammetry Options (RTK): RGB, NIR, DSLR
  • Easy Assembly: Saves time in the field
  • Live Data Feed: View/analyze data in real time
  • Remote Data View: Transmit live data to remote viewers via 4G connection
  • Acquisition Upgrades: High-Res DSLR; RGB GigE Cam; thermal, hyperspectral cameras

LiDAR SPECS

(RANGER LR-T)

LiDAR Sensor

  • Max Range to Target at 20% Reflectivity: 820m
  • Max Effective Measurement Rate: 750,000 meas./s
  • Max FOV of LiDAR in CW-30: 110°
  • Range Accuracy: 15mm one Sigma @ 150m
  • Payload Weight: 4.5kg / 9.92lbs.

Camera

  • Resolution: 24 Megapixels
  • Features: Hi-Res Camera + 35 mm Lens
  • HFOV / VFOW: 55° / 38°
  • Additional Camera/Lens Options Available

Navigation System

  • Constellation Support: GPS, GLONASS
  • Support alignment: Static, Kinematic, Dual-Antenna
  • Operation Modes: Real-time, Post-processing optional
  • Accuracy Position: 1cm + 1ppm RMS horizontal
  • PP Attitude Heading RMS Error: 0.019° IMU options

VTOL SPECS

Phoenix LiDAR TerraHawk CW-30 Fixed-Wing VTOL UAV LiDAR System

UAV Specs

  • Wingspan/Fuselage Length: 4.2m / 2.2m
  • Assembly/Deployment Time: 15 min
  • Weight (Aircraft + LiDAR): 33kg / 72.7 lbs.
  • Max. Take-Off Weight: 34 kg / 75 lbs.
  • Endurance: Up to 2 hours
  • Take-off/Landing: VTOL
  • Communication Range: Up to 30 km (250 m AGL)
  • Cruise Speed: 28 m/s | 55 kn | 100 km/h
  • Max. Speed: 36 m/s | 70 kn | 130 km/h
  • Max. Take-off Altitude: 4,000 m
  • V. Positioning Accuracy: 2 cm
  • H. Positioning Accuracy: 1 cm+ 1 ppm
  • Propulsion System: Gas Engine / Electric Motors

Coverage Estimates

Surface area covered by LiDAR + High Resolution Photo

  • 16 km² mapped at 250 m AGL, 60° LiDAR FOV, 60% overlap
    • 3 cm GSD
    • LiDAR Density: 30 pts/m²
  • 21 km² mapped at 300 m AGL, 60° LiDAR FOV, 60% overlap
    • 4 cm GSD
    • LiDAR Density: 27 pts/m²

Surface area covered by LiDAR with No Photo

  • 40 km² mapped at 250 m AGL, 60° LiDAR FOV, 20% side overlap
    • LiDAR Density: 22 pts/m²
  • 52 km² mapped at 300 m AGL, 60° LiDAR FOV, 20% side overlap
    • LiDAR Density: 19 pts/m²

PRIMARY APPLICATIONS + INDUSTRIES

RAILWAY MAPPING

POWER UTILITIES

OIL & GAS

INFRASTRUCTURE MONITORING

OPEN PIT MINING

VEGETATION PENETRATION

DEVELOPMENT PLANNING

FORESTRY

PHOENIX SOFTWARE SUITE

Phoenix LiDAR Systems provides a proprietary complete software suite for streamlined acquisition, geo-referencing, data fusion & export.

+

LiDARMill Logo White and Red on Clear with Phoenix LiDAR Systems

Automated Post-Processing in the Cloud

LEARN MORE